News:

OS2World.com Forum is back !!!

Remember to visit OS2World at:
http://www.os2world.com

Main Menu

Problem with Panorama resultion

Started by Martin Vieregg, February 26, 2026, 11:56:42 PM

Previous topic - Next topic

Martin Vieregg

My son crashed the HDMI socket of a 2560x1440 screen. The displayport socket is still intact, but my PC does not have a displayport socket. I bought a special adaper cable with a small box (in the other direction, from Displayport to HDMI, you don't need this box, an adapter cable is sufficient) and with Windows, the computer works fine. But with OS/2 (ArcaOS 5.0.6), the computer first turns to VGA and then I can choose 1920x1200 for the next reboot and this lower resultion works. I have a second screen with an intact HDMI socket. I can boot OS/2 by using HDMI and then remove the HDMI cable and switch to the adapter cable and OS/2 shows the full resolution.

So the problem is "only" an initialization problem with Panorama. I already used:
panoutil -c 2560 1440 c:
but this had no effect.

How can I force a specific resultion (on my own risk)?
Any ideas are greatly appreciated.

Dave Yeo

You might be out of luck. Panorama depends on the video bios and sometimes that video bios seems to initialize different ports differently.
Hopefully others have other ideas. I'd suggest a ticket but if you're running 5.06 you're likely out of support.

Neil Waldhauer

It may be that the PC manufacturer fixed their CSM software that provides the Video BIOS. If you can update the BIOS, it might help.
Retired consultant for ArcaOS, OS/2 and eComStation
http://www.blondeguy.com