OS/2, eCS & ArcaOS - Technical > Hardware

Lenovo Thinkpad T14s 1st Gen - 20T1

<< < (4/6) > >>

Martin Iturbide:
Hi Wim

I downloaded " webcam-test-20231223.zip ". webcam.exe give me this.


--- Quote ---[C:\DESKTOP\WEBCAM10]webcam
started.
format:yuyv
 acquire webcam
 set configuration
 negotiate video format
 obtain video format
 commit video format
 set video alt interface
 starting iso video
/n server (video) On-Line.
[00000280]
obtain video error.

--- End quote ---

I can notice that the Webcam lights turns on.

When I run wmvideo (no parameters) the application shows, but I get no video, Snapshot and Testshot menu does not do anything.

Regards

Wim Brul:

--- Quote from: Martin Iturbide on December 23, 2023, 03:40:44 pm ---Hi Wim

I downloaded " webcam-test-20231223.zip ". webcam.exe give me this.


--- Quote ---[C:\DESKTOP\WEBCAM10]webcam
started.
format:yuyv
 acquire webcam
 set configuration
 negotiate video format
 obtain video format
 commit video format
 set video alt interface
 starting iso video
/n server (video) On-Line.
[00000280]
obtain video error.

--- End quote ---

I can notice that the Webcam lights turns on.

When I run wmvideo (no parameters) the application shows, but I get no video, Snapshot and Testshot menu does not do anything.

Regards

--- End quote ---

Thanks Martin,

So basically the same result. Now it is time to try and get some more information about what is going on. So I modified webcam.exe to do so when you specify an additional parameter.
With that parameter specified it will show some more debug information and it will create a webcam.bin file  containing video header data.

Just run webcam /* by itself and report back your results like you did before. Attach that webcam.bin file too.

Regards,
Wim 

Martin Iturbide:
Hi Wim

I run webcam.exe /*

I'm attaching the console log and the bin file.
Just i detail I forgot to tell you before, the webcam.exe program keeps running, it does not quit automatically, I usually do the ctrl+c myself after a while of not reporting anything else on the console.

Regards

Wim Brul:

--- Quote from: Martin Iturbide on December 24, 2023, 12:58:36 pm ---Hi Wim

I run webcam.exe /*

I'm attaching the console log and the bin file.
Just i detail I forgot to tell you before, the webcam.exe program keeps running, it does not quit automatically, I usually do the ctrl+c myself after a while of not reporting anything else on the console.

Regards

--- End quote ---

Thanks again Martin. This webcam actually contains both an "Integrated Camera" and an "Integrated IR Camera".
Scanning the USB descriptors by the webcam program resulted in setting up the "Integrated IR Camera" but no video data was obtained.
I suspect that by using webcam /m the "Integrated Camera" would be setup instead of the "Integrated IR Camera".

However I decided to change scanning the USB descriptors to always use the first camera rather than the last one.
So please test again with this version using webcam /* and report back like you did before.

Regards,
Wim

Martin Iturbide:
Hello Wim

I got the same results here. tested "webcam /m" and "webcam /*"

Regards

Navigation

[0] Message Index

[#] Next page

[*] Previous page