I install ecs 2.0 ga on jfs on G drive
i cant read corectly mon NTFS on c: win 7 i see the directory but i cant go inside
i have a ecs rc5 on the e: patition hpfs , I f i boot on it , i see perfectly the C: ntfs and all the file
robert
Hi bobvirago
Can you give more details?
Drive size, partitions size, and on which order are the windows and ecs partitions on the hadd. Or what is on the NTFS.IFS config.sys different from the e:drive and g:
Regards
I have 2 HD
1 HD 500g sata
partition
bootmanager
c: ntfs 120 g prim bootable " C:win7"
d: fat32 32g log
e: ntfs 32g log bootable : : e:ecsrc5
f: fat32 2g
h: fat32 22g
k: ntfs 268g
2 hd 250g ide
bootmanager prim startable
g: jfs 60g log bootable "ecs 2.0"
m: fat32 31g
x: jfs 100g
y: ntfs 47g
i made a backup of my config G:
i copy the config from e: to G: and replace all E: to g: reference ..
the config is the same ...
there is the first line
RUN=g:\ECS\SYSTEM\GenMac\DRIVER\HELPERW.EXE
REM [ Device Drivers ]
DEVICE=g:\OS2\BOOT\UNICODE.SYS
IFS=g:\ecs\boot\ntfs.ifs /RO:*
IFS=g:\OS2\JFS.IFS /LW:5,20,4 /AUTOCHECK:*
IFS=g:\OS2\HPFS.IFS /CACHg:2048 /CRECL:4 /AUTOCHECK:IG*
IFS=g:\ECS\BOOT\FAT32.IFS /CACHg:2048 /H /Q
PSD=ACPI.PSD /APIC
rem /SMP /APIC /!NOD /TMR
REM /APIC
REM /SMP /APIC /!NOD /TMR
IFS=g:\OS2\BOOT\UDF.IFS /Q
IFS=g:\OS2\BOOT\CDFS.IFS /Q /W
DEVICE=g:\OS2\BOOT\OS2CDROM.DMD /Q
DEVICE=g:\OS2\MDOS\VCDROM.SYS
The only the difference en G: i boot on jfs or e: ntfs
robert
i make tjhis test
if i boot on g:
i cant fully read C: and k: on HD 1 but i read on Y: on HD 2
if i boot on E:
i read all ntfs partition c: k: y:
robert
A question. How did you manage to install eCS on a NTFS partition (e:)? As far as I know the NTFS IFS driver is read only.
If the NTFS partition E: is in fact an HPFS partition then you need to check the versions of the NTFS driver on each version of eCS. If they are different then use the one that 'sees' all the ntfs partitions.
ivan
i made a error e: is hpfs not ntfs
robert