You might also want to try the following: Open up an OS/2 Window session.
Assuming that gets you to [C:\], then just type in the
following three lines pressing Enter after typing in each
one:
Copy con mycopy.cmd
copy d:\fer\fbrcode.bcd d:\fer\fbrcode.dat
Exit
At this point your cursor should be at the left side of
the next line, which should be blank if you've typed
correctly. Just press Ctrl-z (the Ctrl key and the z key)
at the same time and then one last press of the Enter
key. You should get a message saying that 1 file was
copied and be returned to the [C:\] prompt.
What you've just done is to build a two-line OS/2 Command
file named C:\mycopy.cmd. In the WarpCron Setup folder Kim referred you to, just use that file name in the "Program" field but change the radio button under "Type" to say "OS/2 Window" rather than "OS/2 PM". You're done!
Tim H Cardozo
OS/2 SIG of the Sacramento PC Users Group
SIG Leader