OS2 World.Com Forum

Subject  :  floppyless install
Author  :  Solaris solaris2003@zonnet.nl
Date  :  22 Sep, 2003 on 12:30
: Specs: Intergraph Td-30 Dual Pentium I - 133 - Amibios 1996 - 80Mb Ram - Adaptec 7850 SCSI - PcNet Lan 10Mbs.

: I want to install Os/2 Ver 3 (Warp) but trying to start the first floppy results in a clean Reboot.

: What Key-combo was used to show the filesloaded while booting. Maybe i have to remove a particular file to prevent unwanted driver to be loaded.. any other suggestions.

Tried Nt4-Server on this - It will do, but its not OS/2


Subject  :  Re:floppyless install
Author  :  Solaris solaris2003@zonnet.nl
Date  :  22 Sep, 2003 on 12:49
Found the Combo-Key: Alt-F2

Subject  :  Re:floppyless install
Author  :  Kim
Date  :  28 Sep, 2003 on 11:29
Did the installation work out for you after all?

/Kim


Subject  :  Re:floppyless install
Author  :  Solaris solaris2003@zonnet.nl
Date  :  13 Oct, 2003 on 19:38
Hell

The Machine is dead.. is no more.. has met his maker etc..
Parity error - i didnt scrap it yet, but.. thats it for now..

2 - another machine, new questions..
it has been a long time for me, OS/2 and so i have to relearn ALOT. Since i am talking about OS/2 Warp 3 - for some it might be going forward in the past.

urgent or most needed information is
- howto install drivers (video!!)
- there is a config make up tool, where can i get that..
- keyhandling while booting, still havent found the right one.
- WPS improvement background pictures etc..

and if that has been cleared, i can go out and hunt for myselfs. Atm: OS/2 is not running anymore, the config is SNAFU (missing DLL).

3: i got EZ-nos: who know if it runs under OS/2 - that would be nice. I also found the packetdriver for my RTL8139
- i just added device=RTxxx.os2 - but that failed..
so, here you are.. now you know..


Powered by UltraBoard 2000 <www.ub2k.com>