OS2 World.Com Forum

Subject  :  Printing from OS/2 to Windows Printer
Author  :  miles rudolf.simon@messner.de
Date  :  17 Jun, 2005 on 09:05
If your printer is connectet directly to the network
( I use HP LaserJet 4050N ) than it's easy.
I do use the "Streaming Line PRinter (SLPR.PDR)" from IBM.
This will install an new Printer Port. Put in the IP-Address
of the Printer. Use an OS/2 Printer Driver with is compatible
to your Windows-Printer. That's it.
If you need more info. e-mail me.

Subject  :  Re:Printing from OS/2 to Windows Printer
Author  :  BigWarpGuy
Date  :  23 Jun, 2005 on 19:56
http://www.os2warp.be/index2.php?name=win32prn
Could this be used to use a Win printer with OS/2-eCS?

---
BigWarpGuy
- - - - - - - - - - - - - - - - - -
OS/2 Warp-ed/eComStation-ed to the very end.
- - - - - - - - - - - - - - - - -

Subject  :  Re:Printing from OS/2 to Windows Printer
Author  :  miles rudolf.simon@messner.de
Date  :  24 Jun, 2005 on 07:33
I tried it once to get it run on Warp 4 SP15 and on eCS 1.2.
I never hat luck to get it work. So, I don't know if this would
work. I guess you have to try it out. But, if it would work
it would be nice if you would share the "hwo to".
Thanks.

Subject  :  Re:Printing from OS/2 to Windows Printer
Author  :  BigWarpGuy
Date  :  24 Jun, 2005 on 15:32
I am trying to get eCS 1.1 onto a Thinkpad 600. It has a USB port. I will try to use the Win32pm with my Lexmark X100 3in1 to see if it works with it. It will be interesting to see if it will work.

---
BigWarpGuy
- - - - - - - - - - - - - - - - - -
OS/2 Warp-ed/eComStation-ed to the very end.
- - - - - - - - - - - - - - - - -

Powered by UltraBoard 2000 <www.ub2k.com>