ghelfrich (09 Nov, 2004 21:17): I have an internal SCSI Microtech Card Reader PCD-47b that I purchased several years ago. It has been installed in my eCS v1.0 machine for these last several years. It is attached to an Adaptec 2940 SCSI contoller card. After I would insert a memory card into the reader, I would click on 'Refresh Removable Media' and a new drive icon would appear. This has been working successfully for me on this eCS v1.0 machine. Last week, I removed this Card Reader from this machine, and installed it into an eCS v1.1 machine. It is also attached to an Adaptec 2940 SCSI contoller card. However, when I insert the same memory card and click on 'Refresh Removable Media', the memory card is not recognized and a drive icon does not appear. I have tried quite a few things to resolve the issue, and nothing has worked. Does anyone have any ideas or suggestions? I have run out of ideas. Help !!!!
I believe you need to use the backlevel Adaptec SCSI driver that came with eCS 1.0 (the newer one has some bugs..the one that shipped with eCS 1.1). Also make sure you have the SCSI Filter installed(It is available on the ecomstation site in the drivers download section..its called scsiflt.exe I believe).
Regards, Jeramie Samphere Operating Manager, www.os2irc.org |