| Subject | : | cisco 340 wireless |
| Author | : | bobvirago |
| Date | : | 25 Oct, 2005 on 21:57 |
| How to configure my pcmcia wirelees cisco 340 on my A30 thinkpad xwlan dont see it the driver and i always have a error in the config with ibm2ss14.sys robert |
| Subject | : | Re:cisco 340 wireless |
| Author | : | melf mikaelelf@os2ug.se |
| Date | : | 26 Oct, 2005 on 09:13 |
| In the first place, what is your situation now? - Is your card functioning, but you can not use the xwlan-widget? - Is your card not functioning, no power on, no IP-address etc.? - Is your card seen as a LAN-card in the pccardutility or does it show up as memory or something other? - What about the socketservice driver (ibm2ss14.sys), does it support your cardbuscontroller? |
| Subject | : | Re:cisco 340 wireless |
| Author | : | bobvirago |
| Date | : | 26 Oct, 2005 on 15:06 |
| Is your card functioning, but you can not use the xwlan-widget? ***** - Is your card not functioning, no power on, no IP-address etc.?
i have no password and same SSID
Resources status ready - What about the socketservice driver (ibm2ss14.sys), does it support your cardbuscontroller? grosso modo is the information a get |
| Subject | : | Re:cisco 340 wireless |
| Author | : | melf mikaelelf@os2ug.se |
| Date | : | 27 Oct, 2005 on 08:49 |
| Well I'm not especially good at this stuff. Just wanted you to specify yourself, to see if I maybee knew something. But I did a google search and looked at the os2warp.be site. You maybee already know this but it seems that ciscocard is not supported by the IBM wifi-utility and from a diskussion at the ecomstation support board it is said that it could be a problem also with the xwlan utility.You can read yourself at: http://news.ecomstation.com/article.php?id=9179&group=ecomstation.support.networking But I guess there is a lot of guys here using ciscocards that knows better and maybee they can help you. |
| Subject | : | Re:cisco 340 wireless |
| Author | : | bobvirago |
| Date | : | 27 Oct, 2005 on 14:47 |
| after one day a test i found my problleme . IT IS A IRQ PROBLEM i change in the bios the order of irq , before it use 3 now i change to 7 ( my printer is usb) now i work at each start I will read the article for de xwlan thanks |