OS2 World.Com Forum

Subject  :  HCIMONIT.EXe for OS2 (warp 4)
Author  :  PHE
Date  :  05 Feb, 2004 on 12:16
Hello,

Does anyone know where I can download this tool ?

I want to use it to examine my USB host controller.

Regards,


Subject  :  Re:HCIMONIT.EXe for OS2 (warp 4)
Author  :  BigWarpGuy
Date  :  05 Feb, 2004 on 14:26
There is a program called usbres at http://hobbes.nmsu.edu or http://www.os2world.com/usb or at http://www.netlabs.org that might be of help (or any of these locations might have the program or where it could be found).
BigWarpGuy
- - - - - - - - - - - - - - - - - -
OS/2 Warp-ed to the very end.
- - - - - - - - - - - - - - - - -

Subject  :  Re:HCIMONIT.EXe for OS2 (warp 4)
Author  :  PHE
Date  :  05 Feb, 2004 on 14:33
USBRES :

The purpose of this driver is to show all connected USB devices
with exception of USB-hubs connected to the system.

I want to have information about my Host controller.
As I see in the description of USBRES, it gives me info about the devices connected !

Regards,


Subject  :  Re:HCIMONIT.EXe for OS2 (warp 4)
Author  :  Henk
Date  :  05 Feb, 2004 on 22:52
If I call correctly HCIMONIT.exe (Host Controller adapter monitor
utility) is part of the USBBASIC.exe.
With kind regards,

Henk/2


Subject  :  Re:HCIMONIT.EXe for OS2 (warp 4)
Author  :  PHE
Date  :  06 Feb, 2004 on 07:03
Hello Henk,

Ok I 've 2 different USBBASic's. In one it was not in.
I found it in the other one !

Thanks for your help.

I tested it, but I must agree that PCISCAN is the same, and more poverfull !

Regards,


Subject  :  Re:HCIMONIT.EXe for OS2 (warp 4)
Author  :  BigWarpGuy
Date  :  06 Feb, 2004 on 17:35
IIRC - there is a program at http://hobbes.nmsu.edu that 'sniffs' out pci/agp on ones computer. Perhaps it could be used to determine USB cards?
BigWarpGuy
- - - - - - - - - - - - - - - - - -
OS/2 Warp-ed to the very end.
- - - - - - - - - - - - - - - - -

Powered by UltraBoard 2000 <www.ub2k.com>