| Subject | : | Help! os2 warp4.0 performance badly! |
| Author | : | weily weily.gu@hotmail.com |
| Date | : | 08 Mar, 2006 on 06:27 |
| my os2 station recently run very slowly, i cant operate it on desktop, but telnet into it works well. after check, i find my os2vdisk not uped,is that the reason, and how to fix it? may i comment the vdisk.sys(not use vdisk)? thx in advance. in my config.sys vdisk is: DEVICE=C:\OS2\BOOT\VDISK.SYS 100,128,64 |
| Subject | : | Re:Help! os2 warp4.0 performance badly! |
| Author | : | jorejarena icejoe@yahoo.com |
| Date | : | 09 Mar, 2006 on 00:04 |
| IMHO the problem should be in one of the DRAM chips... but don´t forget to test your hdd (for IDE disks the utility Powermax which you can download from maxtor.com could be used to diagnose it). |
| Subject | : | Re:Help! os2 warp4.0 performance badly! |
| Author | : | weily weily.gu@hotmail.com |
| Date | : | 09 Mar, 2006 on 11:21 |
| yeah, after i put this hdd into another computer, the apperance is exactly same, so the problem is located into the HDD or the os2 system software. after i issue: fdisk ,first got the warning: "The partition mapping on drive 1 maybe corrupted. press any key" then: STARTABLE C:Primary fat 2000
any suggestion will be great. |
| Subject | : | Re:Help! os2 warp4.0 performance badly! |
| Author | : | jorejarena icejoe@yahoo.com |
| Date | : | 10 Mar, 2006 on 17:52 |
| Diagnose the disk using Powermax - extended Test . Powermax will fix the disk if possible. Then download recovery software from salvationdata.co (more info in their website), then clone the disk to another disk. Hope this helps. |