OS2 World.Com Forum

Subject  :  Xircom Realport Cardbus Socket Services
Author  :  PHE
Date  :  06 Feb, 2004 on 07:17
Hello,

I have a Xircom Realport Cardbus and I want to use it on Warp 4 (with fix 15)
My portable has a Cardbus controller O2MICRO OZ6933.
I own the OS2 Socket Socket Driver of APsoft. (V6)
Can someone explain me how I can find the values of the parameters for the commandline of SSPCIC.SYS in my case?
The default ones (/e /VS:auto /AP:on /EC: . . ) do not work.
/E /VS:auto /AP:on gives me 6 errormessages lost ( SYS2068 )
/E /VS:auto says that I lost 4.

In what documention must I look for it?
What are the parameters I can find in the PCISCAN of the PC?
(whitch item?)
Regards,


Subject  :  Re:Xircom Realport Cardbus Socket Services
Author  :  davidfor
Date  :  08 Feb, 2004 on 23:16
Exactly what card is it? Most Xircom cards and their drivers are point enabled devices and do not require Socket Services. In fact, for the Xircom card I have, if I have Socket Services and the cards drivers installed, I get a crash during boot. I could probably have Socket Services ignore the slot the card is in, but, as I have no other PCMCIA cards, there isn't much point, and I have uninstalled Socket Services.

The card is a RealPort Ethernet 10/100+Modem 56. The model number is REM56G-100.


David

Powered by UltraBoard 2000 <www.ub2k.com>