| Subject | : | Installing OS/2 Warp v3 in Virtual PC - Problem |
| Author | : | magi humpulaj@msu.edu |
| Date | : | 23 Feb, 2007 on 23:45 |
| I am attempting to install OS/2 in Virtual PC on a 1.6ghz Pentium 4 using the original floppy disks. The settings work fine, setup goes well, I partition the HD, restart, and begin installation. Unfortunately for me, I insert disk 2 when it asks and press enter, but it does not proceed further with the installation. All it does is look at the floppy for half a second before stopping the drive. Is this a software or a hardware problem? Any recommendations for fixing this? Thanks! |
| Subject | : | Re:Installing OS/2 Warp v3 in Virtual PC - Problem |
| Author | : | Blonde Guy |
| Date | : | 24 Feb, 2007 on 00:28 |
| Warp 3 runs fine in a virtual PC, but maybe I installed from the disks, and maybe I unzipped a working Warp 3. At least update the install disks to the latest free IDEDASD.
|