Home | Gallery | Forum | Services | Webmail | Archive | Links | Contact Us | About Us
OS2 World.Com Forum
OS2 World.Com Online Discussion Forum.
Index / OS/2 - General / Hardware
author message
Tekram DC-390T and Tandberg TDC 3820 tape boot sequence
Post a new topic Reply to this Topic Printable Version of this Topic Forward this Topic to your Friend Topic Commands (for administrator or moderators only)
Jamich
Normal member
in user

View this member's profileSearch all posts from this memberSend an email to this member
posts: 35
since: 27 Nov, 2006
1. Tekram DC-390T and Tandberg TDC 3820 tape boot sequence
Reply to this topic with quote Modify your message
I recently installed a Tekram DC-390T PCI SCSI adpater with a Tandberg TDC 3820 tape drive on a OS/2 Version 2.1 and I am unable to get OS/2 to see the SCSI adpater FIRST. What it does is it keeps loading the driver for the tape drive first before it loads the SCSI adpater. What do I need to do with my config sys to let it see this tape drive. My system originally works with a EISA SCSI Adpater which went bad so I am now using the Tekram SCSI Adpater for the tape drive and a IDE HDD. Eyerything else works find.
Date: 27 Nov, 2006 on 14:14
Tekram DC-390T and Tandberg TDC 3820 tape boot sequence
Post a new topic Reply to this Topic Printable Version of this Topic Forward this Topic to your Friend Topic Commands (for administrator or moderators only)
All times are CET+1. < Prev. | P. 1 | Next >
Go to:
 

Powered by UltraBoard 2000 Standard Edition,
Copyright © UltraScripts.com, Inc. 1999-2000.
Home | Gallery | Forums | Services | Webmail | Archive | Links | Contact Us | About Us
© OS2 World.Com 2000-2004