| Subject | : | Newer UniAud driver? |
| Author | : | BigWarpGuy |
| Date | : | 04 May, 2004 on 15:07 |
| I found that http://os2.kiev.ua has newer universal audio driver than http://www.ecomstation.com . I downloaded both and found that http://os2.kiev.ua has 2004 as the year of their driver while 2002 is the date of the driver at http://www.ecomstation.com . Aren't they suppose to have the newest/latest drivers for eCS?
BigWarpGuy - - - - - - - - - - - - - - - - - - OS/2 Warp-ed/eComStation-ed to the very end. - - - - - - - - - - - - - - - - - |
| Subject | : | Re:Newer UniAud driver? |
| Author | : | abwillis abwillis@comcast.net |
| Date | : | 09 May, 2004 on 07:49 |
| The ones on the eCS site are the official release drivers available to SWC subscribers. The ones on os2kiev are a product of the Open Source nature of the ALSA project the drivers were ported from. The Developer of Warpvision has continued the development. While I don't know if these drivers will be in the forthcoming eCS 1.2, they may be. They would not be on the website as the only drivers available there are either drivers only available to eCS users (ntfs, dta, etc) or IBM drivers (USB, uniaud, udf, etc). Andy |
| Subject | : | Re: About what UniAud driver version ... |
| Author | : | icebear |
| Date | : | 10 May, 2004 on 10:15 |
| ... are you talking ? The exact version should be mentioned ... One does not know if you talk about 1.07 or 1.08 or 1.09 The most accurate I know is: 1.09 !!! |
| Subject | : | Re:Newer UniAud driver? |
| Author | : | abwillis abwillis@comcast.net |
| Date | : | 10 May, 2004 on 22:08 |
| I am not sure what version the official build is. 1.04 I think but am not sure. 1.07 was the first to work correctly with my card and I am currently using 1.11 which is available on ftp.os2.kiev.ua in the test directory. Andy |
| Subject | : | UniAud driver not working- no sound? |
| Author | : | BigWarpGuy |
| Date | : | 20 Jul, 2004 on 16:25 |
| I had remmed out the Crystal lines in config.sys to get the Innotek RunTime to install. It worked and I also installed SDK from Innotek. Now the sound does not work unless one considers an occasional 'blurp' working. Any help would be appreciated.
--- BigWarpGuy - - - - - - - - - - - - - - - - - - OS/2 Warp-ed/eComStation-ed to the very end. - - - - - - - - - - - - - - - - - |
| Subject | : | Re:Newer UniAud driver? |
| Author | : | davidfor |
| Date | : | 22 Jul, 2004 on 04:19 |
| Remming out the sound drivers in config.sys is only a temporary solution. Have a look in the readme for the Innotek Runtime for how to handle Crystal sound drivers with it. Also, if you want to use UNIAUD drivers with this (and I don't know if you can as I don't know what soundcard/chip you are using and if UNIAUD supports it), you need to uninstall the current drivers, and then install the new driver. If you simply remove the existing drivers from the config.sys and install a new sound driver, you WILL have problems. The uninstall does more than just modify the config.sys.
|
| Subject | : | Re:Newer UniAud driver? |
| Author | : | BigWarpGuy |
| Date | : | 23 Jul, 2004 on 02:56 |
| I used the UniAud drivers from the Netlabs site (used the ftp link I found/was given at http://groups.yahoo.com/group/ecs-technical ) and it works. I have sound (no more 'blurp' every so often but the sounds that are suppose to be heard).
--- BigWarpGuy - - - - - - - - - - - - - - - - - - OS/2 Warp-ed/eComStation-ed to the very end. - - - - - - - - - - - - - - - - - |
| Subject | : | Re:Newer UniAud driver? |
| Author | : | BigWarpGuy |
| Date | : | 27 Jul, 2004 on 02:44 |
| ftp://ftp.netlabs.org/pub site of the newer uniaud drivers. --- BigWarpGuy - - - - - - - - - - - - - - - - - - OS/2 Warp-ed/eComStation-ed to the very end. - - - - - - - - - - - - - - - - - |
| Subject | : | Re:Newer UniAud driver? |
| Author | : | dljone9 dljone9@os2world.com |
| Date | : | 31 Jul, 2004 on 22:24 |
I have tried several versions of the "public" uniaud drivers, including the What experiences have other had?? |
| Subject | : | Re:Newer UniAud driver? |
| Author | : | HerwigB |
| Date | : | 02 Aug, 2004 on 18:15 |
| I can confirm that. I get best sound quality with my SBLive! with the 1.0.4 version of the uniaud series. The latest testbuild is usable for system sound but not for more. unfortunately. Sound quality is awful, and if I play music via pm123 and a system sound is played pm123 continues to play on silently... Is there a forum for uniaud somewhere? Herwig B. |
| Subject | : | Re:Newer UniAud driver? |
| Author | : | davidfor |
| Date | : | 03 Aug, 2004 on 01:38 |
| The UniAud forum is on the developers site at http://os2.kiev.ua/en/news.php.
--- David |
| Subject | : | Re:Newer UniAud driver? |
| Author | : | BigWarpGuy |
| Date | : | 03 Aug, 2004 on 16:32 |
| http://groups.yahoo.com/group/sbliveos2 Here is a group for the Sound Blaster Live for OS/2. --- BigWarpGuy - - - - - - - - - - - - - - - - - - OS/2 Warp-ed/eComStation-ed to the very end. - - - - - - - - - - - - - - - - - |